icecast -b -c /etc/icecast.xml icecast -b -c /etc/icecast2.xml
<icecast> <limits> <clients>500</clients> <sources>2</sources> <threadpool>5</threadpool> <queue-size>524288</queue-size> <client-timeout>30</client-timeout> <header-timeout>15</header-timeout> <source-timeout>10</source-timeout> <!-- If enabled, this will provide a burst of data when a client first connects, thereby significantly reducing the startup time for listeners that do substantial buffering. However, it also significantly increases latency between the source client and listening client. For low-latency setups, you might want to disable this. --> <burst-on-connect>1</burst-on-connect> <!-- same as burst-on-connect, but this allows for being more specific on how much to burst. Most people won't need to change from the default 64k. Applies to all mountpoints --> <burst-size>65535</burst-size> </limits> <authentication> <!-- Sources log in with username 'source' --> <source-password>ххх</source-password> <!-- Relays log in username 'relay' --> <relay-password>ххх</relay-password> <!-- Admin logs in with the username given below --> <admin-user>val</admin-user> <admin-password>xxx</admin-password> </authentication> <!-- set the mountpoint for a shoutcast source to use, the default if not specified is /stream but you can change it here if an alternative is wanted or an extension is required <shoutcast-mount>/live.nsv</shoutcast-mount> --> <!-- Uncomment this if you want directory listings --> <directory> <yp-url-timeout>15</yp-url-timeout> <yp-url>http://dir.xiph.org/cgi-bin/yp-cgi</yp-url> </directory> <!-- This is the hostname other people will use to connect to your server. It affects mainly the urls generated by Icecast for playlists and yp listings. --> <hostname>xxx</hostname> <!-- You may have multiple <listener> elements --> <listen-socket> <port>8012</port> <!-- <bind-address>127.0.0.1</bind-address> --> <!-- <shoutcast-mount>/stream</shoutcast-mount> --> </listen-socket> <!-- <listen-socket> <port>8001</port> </listen-socket> --> <!--<master-server>127.0.0.1</master-server>--> <!--<master-server-port>8001</master-server-port>--> <!--<master-update-interval>120</master-update-interval>--> <!--<master-password>hackme</master-password>--> <!-- setting this makes all relays on-demand unless overridden, this is useful for master relays which do not have <relay> definitions here. The default is 0 --> <!--<relays-on-demand>1</relays-on-demand>--> <mount> <mount-name>/listen</mount-name> <charset>cp-1251</charset> <max-listeners>1000</max-listeners> <!-- <dump-file>/tmp/dump-example1.ogg</dump-file> --> <burst-size>65536</burst-size> <stream-name>Non-stop music</stream-name> <stream-description>The Best Of Reality FM!</stream-description> <fallback-mount>/rezerv</fallback-mount> <fallback-override>1</fallback-override> <fallback-when-full>0</fallback-when-full> <hidden>0</hidden> <public>1</public> </mount> <mount> <mount-name>/rezerv</mount-name> <charset>cp-1251</charset> <max-listeners>1000</max-listeners> <!-- <dump-file>/tmp/dump-example1.ogg</dump-file> --> <burst-size>65536</burst-size> <stream-description>The Best Of Reality FM!</stream-description> <stream-name>Non-stop music ICQ 4190075</stream-name> <hidden>1</hidden> </mount> <relay> <server>scfire-mtc-aa03.stream.aol.com</server> <port>80</port> <mount>/stream/1024</mount> <local-mount>/rezerv</local-mount> <on-demand>1</on-demand> <relay-shoutcast-metadata>0</relay-shoutcast-metadata> </relay> <relay> <server>xxx</server> <port>8020</port> <mount>/</mount> <local-mount>/listen</local-mount> <on-demand>1</on-demand> <relay-shoutcast-metadata>1</relay-shoutcast-metadata> </relay> <fileserve>1</fileserve> <paths> <!-- basedir is only used if chroot is enabled --> <basedir>/home/icecast</basedir> <!-- Note that if <chroot> is turned on below, these paths must both be relative to the new root, not the original root --> <logdir>/home/icecast/logs</logdir> <webroot>/home/icecast/web</webroot> <adminroot>/home/icecast/admin</adminroot> <pidfile>/home/icecast/icecast.pid</pidfile> <!-- Aliases: treat requests for 'source' path as being for 'dest' path May be made specific to a port or bound address using the "port" and "bind-address" attributes. --> <!-- <alias source="/" dest="/status.xsl"/> --> <!-- Aliases: can also be used for simple redirections as well, this example will redirect all requests for ********** to the status page --> <alias source="/" dest="/status.xsl"/> </paths> <logging> <accesslog>access.log</accesslog> <errorlog>error.log</errorlog> <!-- <playlistlog>playlist.log</playlistlog> --> <loglevel>4</loglevel> <!-- 4 Debug, 3 Info, 2 Warn, 1 Error --> <logsize>10000</logsize> <!-- Max size of a logfile --> <!-- If logarchive is enabled (1), then when logsize is reached the logfile will be moved to [error|access|playlist].log.DATESTAMP, otherwise it will be moved to [error|access|playlist].log.old. Default is non-archive mode (i.e. overwrite) --> <!-- <logarchive>1</logarchive> --> </logging> <security> <chroot>0</chroot> <changeowner> <user>icecast</user> <group>icecast</group> </changeowner> </security> </icecast>
# #The source URL for the broadcast. It must be in the form ********** For those servers without a mountpoint (Shoutcast) use ********** To record from line in, use 'linein' for this entry # SourceURL=http://x.x.x.x:80x0/ # #The server to which the stream is sent. It can be a hostname or IP (example: www.stream.com, 192.168.1.100) # Server=x.x.x.x # #The port to which the stream is sent. Must be a number (example: 8000) # Port=80xx # #This is the encoder password for the destination server (example: hackme) # ServerPassword=xxxxxxx # #This setting tells the destination server to list on any available YP listings. Not all servers support this (Shoutcast does, Icecast2 doesn't) (example: 1 for YES, 0 for NO) # ServerPublic=1 # #This is used in the YP listing, I think only Shoutcast supports this (example: #mystream) # ServerIRC=N/A # #This is used in the YP listing, I think only Shoutcast supports this (example: myAIMaccount) # ServerAIM=N/A # #This is used in the YP listing, I think only Shoutcast supports this (example: 332123132) # ServerICQ=xxxxx # #The URL that is associated with your stream. (example: ********** # ServerStreamURL=xxx # #A short description of the stream (example: Stream House on Fire!) # ServerDescription=xxx # #Genre of music, can be anything you want... (example: Rock) # ServerGenre=xxx # #Used for Icecast/Icecast2 servers, The mountpoint must end in .ogg for Vorbis streams and have NO extention for MP3 streams. If you are sending to a Shoutcast server, this MUST be blank. (example: /mp3, /myvorbis.ogg) # ServerMountpoint=/xxx # #Wether or not oddcast will reconnect if it is disconnected from the destination server (example: 1 for YES, 0 for NO) # AutomaticReconnect=1 # #How long it will wait (in seconds) between reconnect attempts. (example: 10) # AutomaticReconnectSecs=10 # #What format to encode to. Valid values are (OGG, LAME) (example: OGG, LAME) # Encode=LAME # #The port used for WMA stream (example: 8200) # WMAPort=8200 # #Number of clients to support WMA encoding. (example: 1, 10) # WMAClients=5 # #Number of clients to support WMA encoding. (example: 1, 10) # WMAMode=Stereo # #Bitrate. This is the mean bitrate if using VBR. # BitrateNominal=64 # #Minimum Bitrate. Used only if using Bitrate Management (not recommended) or LAME VBR(example: 64, 128) # BitrateMin=48 # #Maximum Bitrate. Used only if using Bitrate Management (not recommended) or LAME VBR (example: 64, 128) # BitrateMax=64 # #Number of channels. Valid values are (1, 2). 1 means Mono, 2 means Stereo (example: 2,1) # NumberChannels=2 # #Vorbis Quality Level. Valid values are between -1 (lowest quality) and 10 (highest). The lower the quality the lower the output bitrate. (example: -1, 3) # OggQuality=8 # #Sample rate for the stream. Valid values depend on wether using lame or vorbis. Vorbis supports odd samplerates such as 32kHz and 48kHz, but lame appears to not.feel free to experiment (example: 44100, 22050, 11025) # Samplerate=44100 # #This flag specifies if you want Vorbis Quality or Bitrate Management. Quality is always recommended. Valid values are (Bitrate, Quality). (example: Quality, Bitrate Management) # OggBitrateQualityFlag=Quality # #This LAME flag indicates that CBR encoding is desired. If this flag is set then LAME with use CBR, if not set then it will use VBR (and you must then specify a VBR mode). Valid values are (1 for SET, 0 for NOT SET) (example: 1) # LameCBRFlag=1 # #A number between 1 and 10 which indicates the desired quality level of the stream. The higher the number, the higher the quality. Also, the higher the number, the higher the CPU utilization. So for slower CPUs, try a low quality number (example: 5) # LameQuality=8 # #Copywrite flag. Not used for much. Valid values (1 for YES, 0 for NO) # LameCopywrite=0 # #Original flag. Not used for much. Valid values (1 for YES, 0 for NO) # LameOriginal=0 # #Strict ISO flag. Not used for much. Valid values (1 for YES, 0 for NO) # LameStrictISO=0 # #Disable Reservior flag. Not used for much. Valid values (1 for YES, 0 for NO) # LameDisableReservior=0 # #This specifies the type of VBR encoding LAME will perform if VBR encoding is set (CBRFlag is NOT SET). See the LAME documention for more on what these mean. Valid values are (vbr_rh, vbr_mt, vbr_mtrh, vbr_abr) # LameVBRMode=vbr_abr # #Use LAMEs lowpass filter. If you set this to 0, then no filtering is done. # LameLowpassfreq=0 # #Use LAMEs highpass filter. If you set this to 0, then no filtering is done. # LameHighpassfreq=0 # #The destination server type. You must set this correctly otherwise you will get problems connecting the encoder. Please make sure you are using the correct one. Valid values are (Shoutcast, Icecast, Icecast2) (example: Icecast2) # ServerType=Icecast2 # #If recording from linein, what device to use (not needed for win32) (example: /dev/dsp) # AdvRecDevice=/dev/dsp # #If recording from linein, what sample rate to open the device with. (example: 44100, 48000) # LiveInSamplerate=44100 # #Used for any window positions (X value) # lastX=0 # #Used for any window positions (Y value) # lastY=0 # #Used for plugins that show the VU meter # showVU=0 # #Flag which indicates we are recording from line in # LineInFlag=0 # #Locked Metadata # LockMetadata= # #Flag which indicates if we are using locked metadata # LockMetadataFlag=0 # #Save directory for archive streams # SaveDirectory= # #Flag which indicates if we are saving archives # SaveDirectoryFlag=0 # #Log Level 1 = LOG_ERROR, 2 = LOG_ERROR+LOG_WARNING, 3 = LOG_ERROR+LOG_WARNING+LOG_DEBUG # LogLevel=1 # #Log File # LogFile=oddcastv2.log # #Save Archives in WAV format # SaveAsWAV=0 # #AAC Quality Level. Valid values are between 10 (lowest quality) and 500 (highest). # AACQuality=400 # #AAC Cutoff Frequency. # AACCutoff=44100
6 •