ОсновноеRadiotalkПользовательское
Компьютер
4   •   Посмотреть все темы

Сервер (виртуальные хосты)

 

3363
Влад @4ih-pqh
В общем ест у меня на дебиане в /var/www две папки ... к примеру ttrk и myttrk
ест домен, который хостится у козлов (ucoz). Так вот у них есть возможность изменять записи к этим доменам. Возьмём запись "А", где указываем ип сервера.

т.е. например veronika.b1oga.net ип к примеру 1.1.1.1
и
vladlen.b1oga.net ип тоже 1.1.1.1

идём в виртуальные хосты и создаём следующее



то есть один домен (поддомен) соответствует некому виртуальному хосту, другой - другому

а вот что получается при перезагрузке апача - апач матерится




в чём проблема? вот один из файлов конфигурации
<VirtualHost veronika.b1oga.net:80>
DocumentRoot "/var/www/ttrk/veronika"
ServerName veronika
<Directory "/var/www/ttrk/veronika">
allow from all
Options +Indexes
</Directory>
</VirtualHost>




кстати подобные трюки работали в винде на старом апаче, вот старый конфиг

##########VIRTUAL HOST SETUP##########
# FOTOFOLIO.SYTES.NET
<VirtualHost *>
ServerName fotofolio.sytes.net
DocumentRoot /www/fotofolio
</VirtualHost>
##########VIRTUAL HOST SETUP##########
# searchin.SYTES.NET
<VirtualHost *>
ServerName searchin.sytes.net
DocumentRoot /www/search
</VirtualHost>

прошу помощи, так как при наборе адреса всегда попадаю на страницу вероники...хоть даже чистый ип

Отредактировано 4ih-pqh - 08.09.2014
7094
--- @Render
<VirtualHost *:80>
DocumentRoot /var/www/ttrk/vladlen
ServerName vladlen.b1oga.net
ServerAlias www.vladlen.b1oga.net
</VirtualHost>

<VirtualHost *:80>
DocumentRoot /var/www/ttrk/veronika
ServerName veronika.b1oga.net
ServerAlias www.veronika.b1oga.net
</VirtualHost>

3363
Влад @4ih-pqh
при таком раскладе апач не матерится, но всегда перекидывает в /var/www сейчас изменил записи домена, мб поможет, так как да этого стоял тип записи а с "*"b.oga.net - то есть любой поддомен...а так есть ещё идеи?

7094
--- @Render
4ih-pqh пишет:

при таком раскладе апач не матерится, но всегда перекидывает в /var/www сейчас изменил записи домена, мб поможет, так как да этого стоял тип записи а с "*"b.oga.net - то есть любой поддомен...а так есть ещё идеи?

Главный конфиг апачая привести в божеский вид и будут нормально виртхосты работать

3363
Влад @4ih-pqh
а что греха таить...правда с некоторыми параметрами я намудрил, да мне и не особо важно, в том плане что нагрузки тут нет (для учёбы)...а остальное я не трогал, в плане хостов

хотя бы разобраться, что бы в будущем уже знать как и что)

ServerName 4ih-pqh
# This is the main Apache server configuration file. It contains the
# configuration directives that give the server its instructions.
# See ********** for detailed information about
# the directives and /usr/share/doc/apache2-common/README.Debian.gz about
# Debian specific hints.
#
#
# Summary of how the Apache 2 configuration works in Debian:
# The Apache 2 web server configuration in Debian is quite different to
# upstream's suggested way to configure the web server. This is because Debian's
# default Apache2 installation attempts to make adding and removing modules,
# virtual hosts, and extra configuration directives as flexible as possible, in
# order to make automating the changes and administering the server as easy as
# possible.

# It is split into several files forming the configuration hierarchy outlined
# below, all located in the /etc/apache2/ directory:
#
# /etc/apache2/
# |-- apache2.conf
# | `-- ports.conf
# |-- mods-enabled
# | |-- *.load
# | `-- *.conf
# |-- conf.d
# | `-- *
# `-- sites-enabled
# `-- *
#
#
# * apache2.conf is the main configuration file (this file). It puts the pieces
# together by including all remaining configuration files when starting up the
# web server.
#
# In order to avoid conflicts with backup files, the Include directive is
# adapted to ignore files that:
# - do not begin with a letter or number
# - contain a character that is neither letter nor number nor _-:.
# - contain .dpkg
#
# Yet we strongly suggest that all configuration files either end with a
# .conf or .load suffix in the file name. The next Debian release will
# ignore files not ending with .conf (or .load for mods-enabled).
#
# * ports.conf is always included from the main configuration file. It is
# supposed to determine listening ports for incoming connections, and which
# of these ports are used for name based virtual hosts.
#
# * Configuration files in the mods-enabled/ and sites-enabled/ directories
# contain particular configuration snippets which manage modules or virtual
# host configurations, respectively.
#
# They are activated by symlinking available configuration files from their
# respective *-available/ counterparts. These should be managed by using our
# helpers a2enmod/a2dismod, a2ensite/a2dissite. See
# their respective man pages for detailed information.
#
# * Configuration files in the conf.d directory are either provided by other
# packages or may be added by the local administrator. Local additions
# should start with local- or end with .local.conf to avoid name clashes. All
# files in conf.d are considered (excluding the exceptions noted above) by
# the Apache 2 web server.
#
# * The binary is called apache2. Due to the use of environment variables, in
# the default configuration, apache2 needs to be started/stopped with
# /etc/init.d/apache2 or apache2ctl. Calling /usr/bin/apache2 directly will not
# work with the default configuration.


# Global configuration
#

#
# ServerRoot: The top of the directory tree under which the server's
# configuration, error, and log files are kept.
#
# NOTE! If you intend to place this on an NFS (or otherwise network)
# mounted filesystem then please read the LockFile documentation (available
# at <URL:http://httpd.apache.org/docs/2.2/mod/mpm_common.html#lockfile>);
# you will save yourself a lot of trouble.
#
# Do NOT add a slash at the end of the directory path.
#
#ServerRoot "/etc/apache2"

#
# The accept serialization lock file MUST BE STORED ON A LOCAL DISK.
#
LockFile ${APACHE_LOCK_DIR}/accept.lock

#
# PidFile: The file in which the server should record its process
# identification number when it starts.
# This needs to be set in /etc/apache2/envvars
#
PidFile ${APACHE_PID_FILE}

#
# Timeout: The number of seconds before receives and sends time out.
#
TimeOut 300

#
# KeepAlive: Whether or not to allow persistent connections (more than
# one request per connection). Set to "Off" to deactivate.
#
KeepAlive on

#
# MaxKeepAliveRequests: The maximum number of requests to allow
# during a persistent connection. Set to 0 to allow an unlimited amount.
# We recommend you leave this number high, for maximum performance.
#
MaxKeepAliveRequests 20

#
# KeepAliveTimeout: Number of seconds to wait for the next request from the
# same client on the same connection.
#
KeepAliveTimeout 5

##
## Server-Pool Size Regulation (MPM specific)
##

# prefork MPM
# StartServers: number of server processes to start
# MinSpareServers: minimum number of server processes which are kept spare
# MaxSpareServers: maximum number of server processes which are kept spare
# MaxClients: maximum number of server processes allowed to start
# MaxRequestsPerChild: maximum number of requests a server process serves
<IfModule mpm_prefork_module>
StartServers 4
MinSpareServers 4
MaxSpareServers 15
ServerLimit 1500
MaxClients 1400
MaxRequestsPerChild 3
</IfModule>

# worker MPM
# StartServers: initial number of server processes to start
# MinSpareThreads: minimum number of worker threads which are kept spare
# MaxSpareThreads: maximum number of worker threads which are kept spare
# ThreadLimit: ThreadsPerChild can be changed to this maximum value during a
# graceful restart. ThreadLimit can only be changed by stopping
# and starting Apache.
# ThreadsPerChild: constant number of worker threads in each server process
# MaxClients: maximum number of simultaneous client connections
# MaxRequestsPerChild: maximum number of requests a server process serves
<IfModule mpm_worker_module>
StartServers 2
MinSpareThreads 25
MaxSpareThreads 75
ThreadLimit 64
ThreadsPerChild 25
ServerLimit 1500
MaxClients 1400
MaxRequestsPerChild 0
</IfModule>

# event MPM
# StartServers: initial number of server processes to start
# MinSpareThreads: minimum number of worker threads which are kept spare
# MaxSpareThreads: maximum number of worker threads which are kept spare
# ThreadsPerChild: constant number of worker threads in each server process
# MaxClients: maximum number of simultaneous client connections
# MaxRequestsPerChild: maximum number of requests a server process serves
<IfModule mpm_event_module>
StartServers 2
MinSpareThreads 25
MaxSpareThreads 75
ThreadLimit 64
ThreadsPerChild 25
ServerLimit 1500
MaxClients 1400
MaxRequestsPerChild 0
</IfModule>

# These need to be set in /etc/apache2/envvars
User ${APACHE_RUN_USER}
Group ${APACHE_RUN_GROUP}

#
# AccessFileName: The name of the file to look for in each directory
# for additional configuration directives. See also the AllowOverride
# directive.
#

AccessFileName .htaccess

#
# The following lines prevent .htaccess and .htpasswd files from being
# viewed by Web clients.
#
<Files ~ "^\.ht">
Order allow,deny
Deny from all
Satisfy all
</Files>

#
# DefaultType is the default MIME type the server will use for a document
# if it cannot otherwise determine one, such as from filename extensions.
# If your server contains mostly text or HTML documents, "text/plain" is
# a good value. If most of your content is binary, such as applications
# or images, you may want to use "application/octet-stream" instead to
# keep browsers from trying to display binary files as though they are
# text.
#
# It is also possible to omit any default MIME type and let the
# client's browser guess an appropriate action instead. Typically the
# browser will decide based on the file's extension then. In cases
# where no good assumption can be made, letting the default MIME type
# unset is suggested instead of forcing the browser to accept
# incorrect metadata.
#
DefaultType None


#
# HostnameLookups: Log the names of clients or just their IP addresses
# e.g., www.apache.org (on) or 204.62.129.132 (off).
# The default is off because it'd be overall better for the net if people
# had to knowingly turn this feature on, since enabling it means that
# each client request will result in AT LEAST one lookup request to the
# nameserver.
#
HostnameLookups Off

# ErrorLog: The location of the error log file.
# If you do not specify an ErrorLog directive within a <VirtualHost>
# container, error messages relating to that virtual host will be
# logged here. If you *do* define an error logfile for a <VirtualHost>
# container, that host's errors will be logged there and not here.
#
ErrorLog ${APACHE_LOG_DIR}/error.log

#
# LogLevel: Control the number of messages logged to the error_log.
# Possible values include: debug, info, notice, warn, error, crit,
# alert, emerg.
#
LogLevel warn

# Include module configuration:
Include mods-enabled/*.load
Include mods-enabled/*.conf

# Include list of ports to listen on and which to use for name based vhosts
Include ports.conf

#
# The following directives define some format nicknames for use with
# a CustomLog directive (see below).
# If you are behind a reverse proxy, you might want to change %h into %{X-Forwarded-For}i
#
##################################################################LogFormat "%v:%p %h %l %u %t \"%r\" %>s %O \"%{Referer}i\" \"%{User-Agent}i\"" vhost_combined
##################################################################LogFormat "%h %l %u %t \"%r\" %>s %O \"%{Referer}i\" \"%{User-Agent}i\"" combined
##################################################################LogFormat "%h %l %u %t \"%r\" %>s %O" common
##################################################################LogFormat "%{Referer}i -> %U" referer
##################################################################LogFormat "%{User-agent}i" agent

# Include of directories ignores editors' and dpkg's backup files,
# see the comments above for details.

# Include generic snippets of statements
Include conf.d/

# Include the virtual host configurations:
Include sites-enabled/

Отредактировано 4ih-pqh - 08.09.2014
3363
Влад @4ih-pqh
да, должен рассказать:

дело в том что если брать создание хостов по дефолту, то хосты создаются в отдельных файлах (как я и делал), а вот если выбирать конкретно для создания хостов конфиг апача, то да, этот вариант проходит:

<VirtualHost *:80>
DocumentRoot /var/www/ttrk/vladlen
ServerName vladlen.b1oga.net
ServerAlias www.vladlen.b1oga.net
</VirtualHost>

<VirtualHost *:80>
DocumentRoot /var/www/ttrk/veronika
ServerName veronika.b1oga.net
ServerAlias www.veronika.b1oga.net
</VirtualHost>


только не пойму, почему с такими ошибками пишется конфиг через вебмин (с лишними причендалами, которые не нужны)

п.с.
собсно что я и имею в виду

20089
Dimitry @Dimitry
а что за панелька такая?

3363
Влад @4ih-pqh
Dimitry пишет:

а что за панелька такая?

webmin раздел "Веб сервер Apache"

20089
Dimitry @Dimitry
Круче стал, да и по-русски уже)

3363
Влад @4ih-pqh
Dimitry пишет:

Круче стал, да и по-русски уже)

а то ))

7094
--- @Render
Судя по мучением с нормальном работой виртхостов, явно крутизной пока что не отличился.
Где всё это крутится? Если на win, проще использовать какой-нибудь Open Server или VertrigoServ, если же nixы, то дальше разбираться.
Виртхосты вообще не важно где прописывать, хоть в главном конфиге апача, хоть в отдельных файлах, в любом случае будут работать если главный конфиг в норме.

3363
Влад @4ih-pqh
Render пишет:

Судя по мучением с нормальном работой виртхостов, явно крутизной пока что не отличился.
Где всё это крутится? Если на win, проще использовать какой-нибудь Open Server или VertrigoServ, если же nixы, то дальше разбираться.
Виртхосты вообще не важно где прописывать, хоть в главном конфиге апача, хоть в отдельных файлах, в любом случае будут работать если главный конфиг в норме.

на дебиане

просто не пойму где он задаёт шаблон как должен этот хост выглядеть...не с потолка же он рисует конфиг

Отредактировано 4ih-pqh - 10.09.2014
7094
--- @Render
4ih-pqh пишет:

Render пишет:

Судя по мучением с нормальном работой виртхостов, явно крутизной пока что не отличился.
Где всё это крутится? Если на win, проще использовать какой-нибудь Open Server или VertrigoServ, если же nixы, то дальше разбираться.
Виртхосты вообще не важно где прописывать, хоть в главном конфиге апача, хоть в отдельных файлах, в любом случае будут работать если главный конфиг в норме.

на дебиане

просто не пойму где он задаёт шаблон как должен этот хост выглядеть...не с потолка же он рисует конфиг

Ну хз, может где-то в файле хранит шаблон, а может его по кусочкам собирает исходя из того, какие чекбоксы натыканы при создавании виртхоста.
Возможно полезно будет - **********


Но я бы лучше отказался от такой панели)
Лучше уж ручками или на худой конец на sh скриптах всё создавать, если ручками лень

3363
Влад @4ih-pqh
Render пишет:

4ih-pqh пишет:

Render пишет:

Судя по мучением с нормальном работой виртхостов, явно крутизной пока что не отличился.
Где всё это крутится? Если на win, проще использовать какой-нибудь Open Server или VertrigoServ, если же nixы, то дальше разбираться.
Виртхосты вообще не важно где прописывать, хоть в главном конфиге апача, хоть в отдельных файлах, в любом случае будут работать если главный конфиг в норме.

на дебиане

просто не пойму где он задаёт шаблон как должен этот хост выглядеть...не с потолка же он рисует конфиг

Ну хз, может где-то в файле хранит шаблон, а может его по кусочкам собирает исходя из того, какие чекбоксы натыканы при создавании виртхоста.
Возможно полезно будет - **********


Но я бы лучше отказался от такой панели)
Лучше уж ручками или на худой конец на sh скриптах всё создавать, если ручками лень

ну тяжело быстро, особенно не из дома, да на компах где всё ограниченно привилегиями управлять динамично прокси, веб сервером, базой данных (хотя собсно настроил и не трогаю) и прочими мелкими вещами)