MainRadiotalkCustom
Технологии вещания, софт, скрипты
3   •   Посмотреть все темы

liquidsoap

 

6245
Тарас @tarasian666
вроди оно radio = mksafe(smooth_add(delay=0.5,p=0.2, normal=list, special=live))
строка с add не сохранилась..

468
Klef @Klef
radio = mksafe(smooth_add(delay=0.5,p=0.2, normal=list, special=live))
хм, вообще не воркает как должно. идет тока "live"
tarasian666 у тя версия какая liquid?

6245
Тарас @tarasian666
1.0.0-beta+svn (trunk/liquidsoap@rev8272).


# One for dynamic jingles, mixed on top of the stream with smooth starts/ends.
jingles_dyn = jingle_meta(playlist(reload=3600,root^"jingles.dynamic"))
jingles_dyn = fallback([request.queue(id="dynq"),jingles_dyn])
s = smooth_add(normal=s,special=switch([({ 0m0s or 30m0s }, jingles_dyn)]

468
Klef @Klef
версия та же.
Смотри как происходит, если передавать в special switch([({ 0m0s }, chtonibud) (т.е. с указанием точного времени когда наложить, то все отлично отрабатывает
но если не передавать switch (типа постоянно), либо switch([({ 10h-22h }, chtonibud) (типа наложить тока с 10 до 10 вечера) то уже шиш.
чешет радостно тока второй поток, первый вообще игнорирует

з.ы. пойду радостно пересоберу

Отредактировано Klef - 06.07.2011
468
Klef @Klef
к слову говоря на днях вышла 1.0 beta 2

468
Klef @Klef
вопрос закрыт
mus = amplify(0.1,mksafe(playlist("/data/radio/music")))
fon = amplify(0.1,mksafe(playlist("/data/radio/fon")))
radio=add([mus,fon])

Отредактировано Klef - 06.07.2011
468
Klef @Klef
и продолжаем неделю глупых вопросов.
Умеет ли наше мыло писать в какой либо файл информацию о тегах, текущий "процент" трека и прочую тех информацию, на подобии как ices.cue

6245
Тарас @tarasian666
незнаю может ли писать, но всю эту информацию можно вытянуть через telnet
php запросом с fsockopen очень просто все эти переменные достать

468
Klef @Klef
tarasian666 пишет:

но всю эту информацию можно вытянуть через telnet

вот, о нем как то и не подумал

833
metra52 @metra52
фишка в том что у меня даже если ./configure проходит то make уже нет
[23:04:31] kochegizov: вот сконфигурировалось
[23:04:32] kochegizov: ---------------------------------------------------------------- Installation

prefix : /usr/local
exec_prefix : ${prefix}
binary : ${exec_prefix}/bin
configuration : ${prefix}/etc/liquidsoap
logging : ${prefix}/var/log/liquidsoap
PIDs : ${prefix}/var/run/liquidsoap
logrotate conf : ${prefix}/etc/logrotate.d
man page : ${datarootdir}/man/man1
doc : ${datarootdir}/doc

-------------------------------------------------------------------- Features

* Supported input formats
- Vorbis : no (requires vorbis)
- Theora : no (requires theora)
- Speex : no (requires speex)
- Dirac : no (requires schroedinger)
- Flac (native) : no (requires flac)
- Flac (ogg) : no (requires flac.ogg)
- MP3 : yes
- AAC : no (requires faad)
- text-to-speech : liquidtts will use "false" as a synthetizer,
but you can edit it later.
- XML playlists : no (requires xmlplaylist)
- Lastfm : no (requires lastfm)

* Supported output formats
- Vorbis : no (requires vorbis)
- MP3 : yes
- AAC : no (requires voaacenc)
- AAC+ : no (requires aacplus)
- SPEEX : no (requires speex)
- Theora : no (requires theora)
- Dirac : no (requires schroedinger)

* Tags
- Taglib (ID3 tags) : yes
- Vorbis : no (requires vorbis)
- charset detection : no (requires camomile)

* Input / output
- Icecast/Shoutcast : yes
- AO : yes
- OSS : yes
- ALSA : no (requires alsa)
- Portaudio : no (requires portaudio)
- Pulseaudio : yes
- JACK : no (requires bjack)
- Old JACK : no (requires jack)
- opal : no
- GStreamer : no (requires gstreamer)

* Audio manipulation
- Samplerate : yes
- SoundTouch : no (requires soundtouch)
- LADSPA : no (requires ladspa)

* Video manipulation
- Gavl : no (requires gavl)
- camlimages :

* MIDI manipulation
- DSSI : no (requires dssi)

* Visualization
- Graphics : yes
- SDL : no (requires sdl)

* Additional libraries
- magic : no (requires magic)
- lo : no (requires lo)

* Graphical interfaces
- Python GUI : no

-----------------------------------------------------------------------------

The Savonet Team thanks you for using liquidsoap...

Now, run
make
to compile, and as root
make install
to install, and...
Have fun!

-bash-3.2#
[23:05:26] kochegizov: а дальше такое
[23:05:26] kochegizov: -bash-3.2# make
grep: PACKAGES.default: No such file or directory
for i in ocaml-cry-0.2.0 ocaml-ao-0.2.0 ocaml-pulseaudio-0.1.1 ocaml-mad-0.4.2 ocaml-taglib-0.1.4 ocaml-lame-0.3.0 ocaml-samplerate-0.1.1 ocaml-dtools-0.2.2 ocaml-duppy-0.4.0 ocaml-mm-0.1.0 liquidsoap-1.0.0-beta2.1; do make -C $i || exit 1; done
make[1]: Entering directory `/root/liquidsoap-1.0.0-beta2.1-full/ocaml-cry-0.2.0'
make -C src all
make[2]: Entering directory `/root/liquidsoap-1.0.0-beta2.1-full/ocaml-cry-0.2.0/src'
make[3]: Entering directory `/root/liquidsoap-1.0.0-beta2.1-full/ocaml-cry-0.2.0/src'
make[3]: `cry.cma' is up to date.
make[3]: Leaving directory `/root/liquidsoap-1.0.0-beta2.1-full/ocaml-cry-0.2.0/src'
make[3]: Entering directory `/root/liquidsoap-1.0.0-beta2.1-full/ocaml-cry-0.2.0/src'
make[3]: `cry.cmxa' is up to date.
make[3]: Leaving directory `/root/liquidsoap-1.0.0-beta2.1-full/ocaml-cry-0.2.0/src'
make[2]: Leaving directory `/root/liquidsoap-1.0.0-beta2.1-full/ocaml-cry-0.2.0/src'
make[1]: Leaving directory `/root/liquidsoap-1.0.0-beta2.1-full/ocaml-cry-0.2.0'
make[1]: Entering directory `/root/liquidsoap-1.0.0-beta2.1-full/ocaml-ao-0.2.0'
make -C src all
make[2]: Entering directory `/root/liquidsoap-1.0.0-beta2.1-full/ocaml-ao-0.2.0/src'
make[3]: Entering directory `/root/liquidsoap-1.0.0-beta2.1-full/ocaml-ao-0.2.0/src'
make[3]: `libao_stubs.a' is up to date.
make[3]: `ao.cma' is up to date.
make[3]: Leaving directory `/root/liquidsoap-1.0.0-beta2.1-full/ocaml-ao-0.2.0/src'
make[3]: Entering directory `/root/liquidsoap-1.0.0-beta2.1-full/ocaml-ao-0.2.0/src'
make[3]: `libao_stubs.a' is up to date.
make[3]: `ao.cmxa' is up to date.
make[3]: Leaving directory `/root/liquidsoap-1.0.0-beta2.1-full/ocaml-ao-0.2.0/src'
make[2]: Leaving directory `/root/liquidsoap-1.0.0-beta2.1-full/ocaml-ao-0.2.0/src'
make[1]: Leaving directory `/root/liquidsoap-1.0.0-beta2.1-full/ocaml-ao-0.2.0'
make[1]: Entering directory `/root/liquidsoap-1.0.0-beta2.1-full/ocaml-pulseaudio-0.1.1'
make -C src all
make[2]: Entering directory `/root/liquidsoap-1.0.0-beta2.1-full/ocaml-pulseaudio-0.1.1/src'
make[3]: Entering directory `/root/liquidsoap-1.0.0-beta2.1-full/ocaml-pulseaudio-0.1.1/src'
make[3]: `libpulseaudio_stubs.a' is up to date.
make[3]: `pulseaudio.cma' is up to date.
make[3]: Leaving directory `/root/liquidsoap-1.0.0-beta2.1-full/ocaml-pulseaudio-0.1.1/src'
make[3]: Entering directory `/root/liquidsoap-1.0.0-beta2.1-full/ocaml-pulseaudio-0.1.1/src'
make[3]: `libpulseaudio_stubs.a' is up to date.
make[3]: `pulseaudio.cmxa' is up to date.
make[3]: Leaving directory `/root/liquidsoap-1.0.0-beta2.1-full/ocaml-pulseaudio-0.1.1/src'
make[2]: Leaving directory `/root/liquidsoap-1.0.0-beta2.1-full/ocaml-pulseaudio-0.1.1/src'
make[1]: Leaving directory `/root/liquidsoap-1.0.0-beta2.1-full/ocaml-pulseaudio-0.1.1'
make[1]: Entering directory `/root/liquidsoap-1.0.0-beta2.1-full/ocaml-mad-0.4.2'
make -C src
make[2]: Entering directory `/root/liquidsoap-1.0.0-beta2.1-full/ocaml-mad-0.4.2/src'
make[3]: Entering directory `/root/liquidsoap-1.0.0-beta2.1-full/ocaml-mad-0.4.2/src'
make[3]: `libmad_stubs.a' is up to date.
make[3]: `mad.cma' is up to date.
make[3]: Leaving directory `/root/liquidsoap-1.0.0-beta2.1-full/ocaml-mad-0.4.2/src'
make[3]: Entering directory `/root/liquidsoap-1.0.0-beta2.1-full/ocaml-mad-0.4.2/src'
make[3]: `libmad_stubs.a' is up to date.
make[3]: `mad.cmxa' is up to date.
make[3]: Leaving directory `/root/liquidsoap-1.0.0-beta2.1-full/ocaml-mad-0.4.2/src'
make[2]: Leaving directory `/root/liquidsoap-1.0.0-beta2.1-full/ocaml-mad-0.4.2/src'
make[1]: Leaving directory `/root/liquidsoap-1.0.0-beta2.1-full/ocaml-mad-0.4.2'
make[1]: Entering directory `/root/liquidsoap-1.0.0-beta2.1-full/ocaml-taglib-0.1.4'
make -C src all
make[2]: Entering directory `/root/liquidsoap-1.0.0-beta2.1-full/ocaml-taglib-0.1.4/src'
make[3]: Entering directory `/root/liquidsoap-1.0.0-beta2.1-full/ocaml-taglib-0.1.4/src'
make[3]: `libtaglib_stubs.a' is up to date.
make[3]: `taglib.cma' is up to date.
make[3]: Leaving directory `/root/liquidsoap-1.0.0-beta2.1-full/ocaml-taglib-0.1.4/src'
make[3]: Entering directory `/root/liquidsoap-1.0.0-beta2.1-full/ocaml-taglib-0.1.4/src'
make[3]: `libtaglib_stubs.a' is up to date.
make[3]: `taglib.cmxa' is up to date.
make[3]: Leaving directory `/root/liquidsoap-1.0.0-beta2.1-full/ocaml-taglib-0.1.4/src'
make[2]: Leaving directory `/root/liquidsoap-1.0.0-beta2.1-full/ocaml-taglib-0.1.4/src'
make[1]: Leaving directory `/root/liquidsoap-1.0.0-beta2.1-full/ocaml-taglib-0.1.4'
make[1]: Entering directory `/root/liquidsoap-1.0.0-beta2.1-full/ocaml-lame-0.3.0'
make -C src all
make[2]: Entering directory `/root/liquidsoap-1.0.0-beta2.1-full/ocaml-lame-0.3.0/src'
make[3]: Entering directory `/root/liquidsoap-1.0.0-beta2.1-full/ocaml-lame-0.3.0/src'
make[3]: `liblame_stubs.a' is up to date.
make[3]: `lame.cma' is up to date.
make[3]: Leaving directory `/root/liquidsoap-1.0.0-beta2.1-full/ocaml-lame-0.3.0/src'
make[3]: Entering directory `/root/liquidsoap-1.0.0-beta2.1-full/ocaml-lame-0.3.0/src'
make[3]: `liblame_stubs.a' is up to date.
make[3]: `lame.cmxa' is up to date.
make[3]: Leaving directory `/root/liquidsoap-1.0.0-beta2.1-full/ocaml-lame-0.3.0/src'
rm -f lame_dynlink.cmi
make[2]: Leaving directory `/root/liquidsoap-1.0.0-beta2.1-full/ocaml-lame-0.3.0/src'
make[1]: Leaving directory `/root/liquidsoap-1.0.0-beta2.1-full/ocaml-lame-0.3.0'
make[1]: Entering directory `/root/liquidsoap-1.0.0-beta2.1-full/ocaml-samplerate-0.1.1'
make -C src all
make[2]: Entering directory `/root/liquidsoap-1.0.0-beta2.1-full/ocaml-samplerate-0.1.1/src'
make[3]: Entering directory `/root/liquidsoap-1.0.0-beta2.1-full/ocaml-samplerate-0.1.1/src'
make[3]: `libsamplerate_stubs.a' is up to date.
make[3]: `samplerate.cma' is up to date.
make[3]: Leaving directory `/root/liquidsoap-1.0.0-beta2.1-full/ocaml-samplerate-0.1.1/src'
make[3]: Entering directory `/root/liquidsoap-1.0.0-beta2.1-full/ocaml-samplerate-0.1.1/src'
make[3]: `libsamplerate_stubs.a' is up to date.
make[3]: `samplerate.cmxa' is up to date.
make[3]: Leaving directory `/root/liquidsoap-1.0.0-beta2.1-full/ocaml-samplerate-0.1.1/src'
make[2]: Leaving directory `/root/liquidsoap-1.0.0-beta2.1-full/ocaml-samplerate-0.1.1/src'
make[1]: Leaving directory `/root/liquidsoap-1.0.0-beta2.1-full/ocaml-samplerate-0.1.1'
make[1]: Entering directory `/root/liquidsoap-1.0.0-beta2.1-full/ocaml-dtools-0.2.2'
make -C src
make[2]: Entering directory `/root/liquidsoap-1.0.0-beta2.1-full/ocaml-dtools-0.2.2/src'
make[3]: Entering directory `/root/liquidsoap-1.0.0-beta2.1-full/ocaml-dtools-0.2.2/src'
make[3]: `dtools.cma' is up to date.
make[3]: Leaving directory `/root/liquidsoap-1.0.0-beta2.1-full/ocaml-dtools-0.2.2/src'
make[3]: Entering directory `/root/liquidsoap-1.0.0-beta2.1-full/ocaml-dtools-0.2.2/src'
make[3]: `dtools.cmxa' is up to date.
make[3]: Leaving directory `/root/liquidsoap-1.0.0-beta2.1-full/ocaml-dtools-0.2.2/src'
make[2]: Leaving directory `/root/liquidsoap-1.0.0-beta2.1-full/ocaml-dtools-0.2.2/src'
make[1]: Leaving directory `/root/liquidsoap-1.0.0-beta2.1-full/ocaml-dtools-0.2.2'
make[1]: Entering directory `/root/liquidsoap-1.0.0-beta2.1-full/ocaml-duppy-0.4.0'
make -C src all
make[2]: Entering directory `/root/liquidsoap-1.0.0-beta2.1-full/ocaml-duppy-0.4.0/src'
make[3]: Entering directory `/root/liquidsoap-1.0.0-beta2.1-full/ocaml-duppy-0.4.0/src'
ocamlc.opt -thread -c -cc "gcc" -ccopt "-fPIC -g -O2 -Wall -DCAML_NAME_SPACE \
-DPIC \
-I/usr/lib/ocaml/pcre -o duppy_stubs.o " duppy_stubs.c
duppy_stubs.c:23:30: error: caml/unixsupport.h: No such file or directory
duppy_stubs.c: In function 'ocaml_duppy_write_ba':
duppy_stubs.c:50: warning: implicit declaration of function 'Caml_ba_data_val'
duppy_stubs.c:50: warning: initialization makes pointer from integer without a cast
duppy_stubs.c:56: warning: implicit declaration of function 'write'
duppy_stubs.c:60: warning: implicit declaration of function 'uerror'
duppy_stubs.c:60: error: 'Nothing' undeclared (first use in this function)
duppy_stubs.c:60: error: (Each undeclared identifier is reported only once
duppy_stubs.c:60: error: for each function it appears in.)
make[3]: *** [duppy_stubs.o] Error 2
make[3]: Leaving directory `/root/liquidsoap-1.0.0-beta2.1-full/ocaml-duppy-0.4.0/src'
make[2]: *** [byte-code-library] Error 2
make[2]: Leaving directory `/root/liquidsoap-1.0.0-beta2.1-full/ocaml-duppy-0.4.0/src'
make[1]: *** [all] Error 2
make[1]: Leaving directory `/root/liquidsoap-1.0.0-beta2.1-full/ocaml-duppy-0.4.0'
make: *** [all] Error 1
-bash-3.2#

У меня CentOS 5.4(Final)

Отредактировано metra52 - 11.07.2011
468
Klef @Klef
суля по логу, не хватает, или не видит duppy_stubs
тока что это, не подскажу =)

468
Klef @Klef
ага, вижу, собираете версию 1.0.0-beta2.1-full
она у мну тож на этом летит.

собирал 1.0.0-beta2
но там какой то косяк с ocaml-flaad и ocaml-mad, подсунул из svn версии

833
metra52 @metra52
я эти пакеты исключил, но ошибка с дуппи в любой версии хоть в свн хоть в какой то еще одно и тоже

6245
Тарас @tarasian666
у меня был трабл с faad то есть его отключал а оно все ровно материлось что его нет, собрал с ним и все пучком

Добавлено спустя 2 минуты 34 секунды:
PS НЕ СТАВЬТЕ CENTOS ЕСЛИ ХОТИТЕ ИНЕТ РАДИО ! )))

833
metra52 @metra52
ахахха точно Тарас +1)))) Дружно ставим Debian

833
metra52 @metra52
Можете пояснить?

for-all-host:~# ./liqu.liq
./liqu.liq: line 3: syntax error near unexpected token `"log.file.path","/tmp/nonstop.log"'
./liqu.liq: line 3: `set("log.file.path","/tmp/nonstop.log")'

Отредактировано metra52 - 09.07.2011
223
Игорь @devilben
metra52 пишет:

я эти пакеты исключил, но ошибка с дуппи в любой версии хоть в свн хоть в какой то еще одно и тоже

в самом низу PACKAGES:# ============================================================================
# Finally, the mandatory lib dtools, duppy and liquidsoap...
# ============================================================================

ocaml-dtools
ocaml-duppy
ocaml-mm
liquidsoap

типа даппи обязательный пакет

Отредактировано devilben - 09.07.2011
833
metra52 @metra52
Ну и....он не ставится. И вот по логу скажите что нибудь .... ставил из deb пакета версию 0.9.2 выдало при запуске такую вот шнягу
metra52 пишет:

Можете пояснить?

for-all-host:~# ./liqu.liq
./liqu.liq: line 3: syntax error near unexpected token `"log.file.path","/tmp/nonstop.log"'
./liqu.liq: line 3: `set("log.file.path","/tmp/nonstop.log")'

Файл такого содержания
#!/usr/local/bin/liquidsoap
set("log.file.path","/tmp/nonstop.log")

set("init.daemon",true)
set("init.daemon.pidfile",false)

# telnet server для использования liGUIdsoap
set("server.telnet", true)

# функция кроссфейда, здесь желательно ни чего не менять
def crossfade(~start_next,~fade_in,~fade_out,s)
s = fade.in(duration=fade_in,s)
s = fade.out(duration=fade_out,s)
fader = fun (a,b) -> add(normalize=false,[b,a])
cross(fader,s)
end

#дневной плейлист
day = out(playlist("/var/www/metra52/data/www/onlydc.ru/music/day.txt"))
#ночной
night = out(playlist("/var/www/metra52/data/www/onlydc.ru/music/night.txt"))
#Джинглы
jingles = out(playlist("/var/www/metra52/data/www/onlydc.ru/music/jingls.txt"))

myplay = switch([({ 3h-23h }, day),({ 23h-3h }, night)])

def smooth_add(~delay=0.5,~p=0.2,~normal,~special)
d = delay
fade.final = fade.final(duration=d*2.)
fade.initial = fade.initial(duration=d*2.)
q = 1. - p
c = amplify
fallback(track_sensitive=false,
[special,normal],
transitions=[
fun(normal,special)->
add(normalize=false,
[c(p,normal),
c(q,fade.final(type="sin",normal)),
sequence([blank(duration=d),c(q,special)])]),
fun(special,normal)->
add(normalize=false,
[c(p,normal),
c(q,fade.initial(type="sin",normal))])
])
end


#построение плейлиста с кроссфейдом
#fade_out - затухание предыдущей песни в сек
#fade_in - нарастание следующей песни в сек

radioq = mksafe(crossfade(start_next=1.,fade_out=7.,fade_in=7.,myplay))
radio = smooth_add(normal=radioq,special=switch([({ 20m0s or 50m0s }, jingles)]))

#radio = random(weights = [1, 4],[jingles, myplay])

#запускаем вещалку
#output.icecast(%mp3,
# host = "localhost", port = 9000,
# password = "216937612", mount = "non-stop",name="OnLY DanCe Radio ~ RJ^NOED ~net", description="Club Music For LIVE", genre="Club House",url="http://onlydc.ru",radio)

223
Игорь @devilben
metra52 пишет:

Можете пояснить?

for-all-host:~# ./liqu.liq
./liqu.liq: line 3: syntax error near unexpected token `"log.file.path","/tmp/nonstop.log"'
./liqu.liq: line 3: `set("log.file.path","/tmp/nonstop.log")'

Попробуй поменять местами
#!/usr/local/bin/liquidsoap

set("init.daemon",true)
set("init.daemon.pidfile",false)
set("log.file.path","/tmp/liquidsoap.log")

833
metra52 @metra52
не помогло+ до этого как то 1 раз и так работало